1070 aluminium coil is a commercially pure aluminium product supplied as continuous rolled material. It is useful when the specification places emphasis on formability, low weight and a clearly identified aluminium grade. The selected temper, thickness and surface condition must suit the intended forming process.
1070 aluminium coil is a commercially pure aluminium product supplied as continuous rolled material. It is useful when the specification places emphasis on formability, low weight and a clearly identified aluminium grade. The selected temper, thickness and surface condition must suit the intended forming process.
Enquiries may cover formed covers, liners, trim, equipment panels or strip components where the design specifies 1070. For electrical or heat-transfer parts, state the required conductivity, condition and inspection criteria; the grade name alone does not define the finished component performance.
Start with the drawing and forming sequence. Identify the tightest bend, visible surface, edge requirement and any subsequent joining or finishing operation. If the process requires a soft condition, name the temper rather than relying on the general description of pure aluminium.
Match the coil to the receiving line before placing an order. Confirm the inside diameter, maximum outside diameter, coil weight and permitted winding direction. State whether the order is for full-width coil, slit strip or material to be cut into sheets. Width and edge tolerances should reflect the next operation.
Separate essential requirements from preferred options. A clear specification allows any proposed change in temper, dimensions or finish to be reviewed before the order is accepted. Include drawing revision references so purchasing, production and inspection use the same requirements.
Describe the visible side, permitted surface marks, protective film requirements and handling method. Keep the material identification associated with the coil during receiving, storage and conversion. If traceability needs to continue onto slit coils or cut pieces, include that requirement in the processing plan.
The following checklist defines the enquiry. Availability, limits and tolerances are confirmed for the requested grade and condition.
| Product | 1070 Aluminium Coil |
|---|---|
| Alloy designation | 1070; chemistry to the specified material standard |
| Temper | Full temper designation and required delivery condition |
| Thickness | Nominal thickness, tolerance and inspection method |
| Width | Coil or strip width, tolerance and edge condition |
| Coil dimensions | Inside diameter, maximum outside diameter and coil weight |
| Surface | Mill finish or agreed finish, visible-side criteria and protection |
| Further processing | Slitting, levelling, cut-to-length or other processing as agreed |
| Inspection | Required dimensional, chemical, mechanical and supplementary documentation |
| Identification | Order, grade, temper and batch or coil identification |
| Packing | Support, wrapping, edge protection and handling orientation to order |
Do not apply a single generic strength, elongation or tolerance value to every temper and thickness. Name the applicable product standard and acceptance requirements in the purchase specification. Any proposed substitute material needs technical approval before supply.
Protected bundles or cases with support and identification for each order. Agree the maximum package weight, lifting method and unloading requirements before dispatch. Packaging and labels should support checking the material against the delivery documents.
Inspect the visible packaging condition on arrival and record damage promptly. Store material with appropriate support, protection from contamination and moisture, and separation where needed to protect finished surfaces. Follow the handling guidance for the supplied material and package.
Provide the alloy designation, product standard, dimensions, delivery condition, quantity, application and destination. Include the relevant drawing and inspection requirements.
No. Surface appearance and photographs do not establish chemistry or properties. Use the written specification and agreed material documentation.
Include the desired dimensions and processing in the enquiry. Availability, tolerances and any processing allowance must be confirmed for the offered material.
No. Selection depends on the exact grade, condition and operating environment, along with component design and fabrication. Review proposed materials against the application specification.
State the required documents and tests in the enquiry. Confirm their scope in the quotation rather than assuming that every order includes the same inspection package.
Provide destination, unloading limits and requested delivery arrangements. The confirmed quotation and order define packing, documentation and delivery terms.
Explore grades and supply options in our Aluminium Coil category. Send dimensions, quantities and application details to request an offer.
